DynAnyOperations (Java Platform SE 8 )

All Known Subinterfaces:

DynAny, DynArray, DynArrayOperations, DynEnum, DynEnumOperations, DynFixed, DynFixedOperations, DynSequence, DynSequenceOperations, DynStruct, DynStructOperations, DynUnion, DynUnionOperations, DynValue, DynValueBox, DynValueBoxOperations, DynValueCommon, DynValueCommonOperations, DynValueOperations

All Known Implementing Classes:

_DynAnyStub, _DynArrayStub, _DynEnumStub, _DynFixedStub, _DynSequenceStub, _DynStructStub, _DynUnionStub, _DynValueStub
```
public interface DynAnyOperations
```
Any values can be dynamically interpreted (traversed) and constructed through DynAny objects. A DynAny object is associated with a data value which corresponds to a copy of the value inserted into an any.
A DynAny object may be viewed as an ordered collection of component DynAnys. For DynAnys representing a basic type, such as long, or a type without components, such as an empty exception, the ordered collection of components is empty. Each DynAny object maintains the notion of a current position into its collection of component DynAnys. The current position is identified by an index value that runs from 0 to n-1, where n is the number of components. The special index value -1 indicates a current position that points nowhere. For values that cannot have a current position (such as an empty exception), the index value is fixed at -1. If a DynAny is initialized with a value that has components, the index is initialized to 0. After creation of an uninitialized DynAny (that is, a DynAny that has no value but a TypeCode that permits components), the current position depends on the type of value represented by the DynAny. (The current position is set to 0 or -1, depending on whether the new DynAny gets default values for its components.)
The iteration operations rewind, seek, and next can be used to change the current position and the current_component operation returns the component at the current position. The component_count operation returns the number of components of a DynAny. Collectively, these operations enable iteration over the components of a DynAny, for example, to (recursively) examine its contents.
A constructed DynAny object is a DynAny object associated with a constructed type. There is a different interface, inheriting from the DynAny interface, associated with each kind of constructed type in IDL (fixed, enum, struct, sequence, union, array, exception, and value type).
A constructed DynAny object exports operations that enable the creation of new DynAny objects, each of them associated with a component of the constructed data value. As an example, a DynStruct is associated with a struct value. This means that the DynStruct may be seen as owning an ordered collection of components, one for each structure member. The DynStruct object exports operations that enable the creation of new DynAny objects, each of them associated with a member of the struct.
If a DynAny object has been obtained from another (constructed) DynAny object, such as a DynAny representing a structure member that was created from a DynStruct, the member DynAny is logically contained in the DynStruct. Calling an insert or get operation leaves the current position unchanged. Destroying a top-level DynAny object (one that was not obtained as a component of another DynAny) also destroys any component DynAny objects obtained from it. Destroying a non-top level DynAny object does nothing. Invoking operations on a destroyed top-level DynAny or any of its descendants raises OBJECT_NOT_EXIST. If the programmer wants to destroy a DynAny object but still wants to manipulate some component of the data value associated with it, then he or she should first create a DynAny for the component and, after that, make a copy of the created DynAny object.
The behavior of DynAny objects has been defined in order to enable efficient implementations in terms of allocated memory space and speed of access. DynAny objects are intended to be used for traversing values extracted from anys or constructing values of anys at runtime. Their use for other purposes is not recommended.
Insert and get operations are necessary to handle basic DynAny objects but are also helpful to handle constructed DynAny objects. Inserting a basic data type value into a constructed DynAny object implies initializing the current component of the constructed data value associated with the DynAny object. For example, invoking insert_boolean on a DynStruct implies inserting a boolean data value at the current position of the associated struct data value. A type is consistent for inserting or extracting a value if its TypeCode is equivalent to the TypeCode contained in the DynAny or, if the DynAny has components, is equivalent to the TypeCode of the DynAny at the current position.
DynAny and DynAnyFactory objects are intended to be local to the process in which they are created and used. This means that references to DynAny and DynAnyFactory objects cannot be exported to other processes, or externalized with ORB.object_to_string(). If any attempt is made to do so, the offending operation will raise a MARSHAL system exception. Since their interfaces are specified in IDL, DynAny objects export operations defined in the standard org.omg.CORBA.Object interface. However, any attempt to invoke operations exported through the Object interface may raise the standard NO_IMPLEMENT exception. An attempt to use a DynAny object with the DII may raise the NO_IMPLEMENT exception.

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method and Description
`void`	`assign(DynAny dyn_any)` Initializes the value associated with a DynAny object with the value associated with another DynAny object.
`int`	`component_count()` Returns the number of components of a DynAny.
`DynAny`	`copy()` Creates a new DynAny object whose value is a deep copy of the DynAny on which it is invoked.
`DynAny`	`current_component()` Returns the DynAny for the component at the current position.
`void`	`destroy()` Destroys a DynAny object.
`boolean`	`equal(DynAny dyn_any)` Compares two DynAny values for equality.
`void`	`from_any(Any value)` Initializes the value associated with a DynAny object with the value contained in an any.
`Any`	`get_any()` Extracts an Any value contained in the Any represented by this DynAny.
`boolean`	`get_boolean()` Extracts the boolean value from this DynAny.
`char`	`get_char()` Extracts the char value from this DynAny.
`double`	`get_double()` Extracts the double value from this DynAny.
`DynAny`	`get_dyn_any()` Extracts the Any value contained in the Any represented by this DynAny and returns it wrapped into a new DynAny.
`float`	`get_float()` Extracts the float value from this DynAny.
`int`	`get_long()` Extracts the integer value from this DynAny.
`long`	`get_longlong()` Extracts the long value from this DynAny.
`byte`	`get_octet()` Extracts the byte value from this DynAny.
`Object`	`get_reference()` Extracts the reference to a CORBA Object from this DynAny.
`short`	`get_short()` Extracts the short value from this DynAny.
`String`	`get_string()` Extracts the string value from this DynAny.
`TypeCode`	`get_typecode()` Extracts the TypeCode object from this DynAny.
`int`	`get_ulong()` Extracts the integer value from this DynAny.
`long`	`get_ulonglong()` Extracts the long value from this DynAny.
`short`	`get_ushort()` Extracts the short value from this DynAny.
`Serializable`	`get_val()` Extracts a Serializable object from this DynAny.
`char`	`get_wchar()` Extracts the long value from this DynAny.
`String`	`get_wstring()` Extracts the string value from this DynAny.
`void`	`insert_any(Any value)` Inserts an Any value into the Any represented by this DynAny.
`void`	`insert_boolean(boolean value)` Inserts a boolean value into the DynAny.
`void`	`insert_char(char value)` Inserts a char value into the DynAny.
`void`	`insert_double(double value)` Inserts a double value into the DynAny.
`void`	`insert_dyn_any(DynAny value)` Inserts the Any value contained in the parameter DynAny into the Any represented by this DynAny.
`void`	`insert_float(float value)` Inserts a float value into the DynAny.
`void`	`insert_long(int value)` Inserts an integer value into the DynAny.
`void`	`insert_longlong(long value)` Inserts a long value into the DynAny.
`void`	`insert_octet(byte value)` Inserts a byte value into the DynAny.
`void`	`insert_reference(Object value)` Inserts a reference to a CORBA object into the DynAny.
`void`	`insert_short(short value)` Inserts a short value into the DynAny.
`void`	`insert_string(String value)` Inserts a string value into the DynAny.
`void`	`insert_typecode(TypeCode value)` Inserts a TypeCode object into the DynAny.
`void`	`insert_ulong(int value)` Inserts an integer value into the DynAny.
`void`	`insert_ulonglong(long value)` Inserts a long value into the DynAny.
`void`	`insert_ushort(short value)` Inserts a short value into the DynAny.
`void`	`insert_val(Serializable value)` Inserts a reference to a Serializable object into this DynAny.
`void`	`insert_wchar(char value)` Inserts a char value into the DynAny.
`void`	`insert_wstring(String value)` Inserts a string value into the DynAny.
`boolean`	`next()` Advances the current position to the next component.
`void`	`rewind()` Is equivalent to seek(0).
`boolean`	`seek(int index)` Sets the current position to index.
`Any`	`to_any()` Creates an any value from a DynAny object.
`TypeCode`	`type()` Returns the TypeCode associated with this DynAny object.

- Method Detail
  - type
```
TypeCode type()
```
    Returns the TypeCode associated with this DynAny object. A DynAny object is created with a TypeCode value assigned to it. This TypeCode value determines the type of the value handled through the DynAny object. Note that the TypeCode associated with a DynAny object is initialized at the time the DynAny is created and cannot be changed during lifetime of the DynAny object.
    
    Returns:
    
    The TypeCode associated with this DynAny object
  - assign
```
void assign(DynAny dyn_any)
     throws TypeMismatch
```
    Initializes the value associated with a DynAny object with the value associated with another DynAny object. The current position of the target DynAny is set to zero for values that have components and to -1 for values that do not have components.
    
    Parameters:
    
    dyn_any -
    
    Throws:
    
    TypeMismatch - if the type of the passed DynAny is not equivalent to the type of target DynAny
  - from_any
```
void from_any(Any value)
       throws TypeMismatch,
              InvalidValue
```
    Initializes the value associated with a DynAny object with the value contained in an any. The current position of the target DynAny is set to zero for values that have components and to -1 for values that do not have components.
    
    Throws:
    
    TypeMismatch - if the type of the passed Any is not equivalent to the type of target DynAny
    
    InvalidValue - if the passed Any does not contain a legal value (such as a null string)
  - to_any
```
Any to_any()
```
    Creates an any value from a DynAny object. A copy of the TypeCode associated with the DynAny object is assigned to the resulting any. The value associated with the DynAny object is copied into the any.
    
    Returns:
    
    a new Any object with the same value and TypeCode
  - equal
```
boolean equal(DynAny dyn_any)
```
    Compares two DynAny values for equality. Two DynAny values are equal if their TypeCodes are equivalent and, recursively, all component DynAnys have equal values. The current position of the two DynAnys being compared has no effect on the result of equal.
    
    Returns:
    
    true of the DynAnys are equal, false otherwise
  - destroy
```
void destroy()
```
    Destroys a DynAny object. This operation frees any resources used to represent the data value associated with a DynAny object. It must be invoked on references obtained from one of the creation operations on the ORB interface or on a reference returned by DynAny.copy() to avoid resource leaks. Invoking destroy on component DynAny objects (for example, on objects returned by the current_component operation) does nothing. Destruction of a DynAny object implies destruction of all DynAny objects obtained from it. That is, references to components of a destroyed DynAny become invalid. Invocations on such references raise OBJECT_NOT_EXIST. It is possible to manipulate a component of a DynAny beyond the life time of the DynAny from which the component was obtained by making a copy of the component with the copy operation before destroying the DynAny from which the component was obtained.
  - copy
```
DynAny copy()
```
    Creates a new DynAny object whose value is a deep copy of the DynAny on which it is invoked. The operation is polymorphic, that is, invoking it on one of the types derived from DynAny, such as DynStruct, creates the derived type but returns its reference as the DynAny base type.
    
    Returns:
    
    a deep copy of the DynAny object
  - insert_boolean
```
void insert_boolean(boolean value)
             throws TypeMismatch,
                    InvalidValue
```
    Inserts a boolean value into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_octet
```
void insert_octet(byte value)
           throws TypeMismatch,
                  InvalidValue
```
    Inserts a byte value into the DynAny. The IDL octet data type is mapped to the Java byte data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_char
```
void insert_char(char value)
          throws TypeMismatch,
                 InvalidValue
```
    Inserts a char value into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_short
```
void insert_short(short value)
           throws TypeMismatch,
                  InvalidValue
```
    Inserts a short value into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_ushort
```
void insert_ushort(short value)
            throws TypeMismatch,
                   InvalidValue
```
    Inserts a short value into the DynAny. The IDL ushort data type is mapped to the Java short data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_long
```
void insert_long(int value)
          throws TypeMismatch,
                 InvalidValue
```
    Inserts an integer value into the DynAny. The IDL long data type is mapped to the Java int data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_ulong
```
void insert_ulong(int value)
           throws TypeMismatch,
                  InvalidValue
```
    Inserts an integer value into the DynAny. The IDL ulong data type is mapped to the Java int data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_float
```
void insert_float(float value)
           throws TypeMismatch,
                  InvalidValue
```
    Inserts a float value into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_double
```
void insert_double(double value)
            throws TypeMismatch,
                   InvalidValue
```
    Inserts a double value into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_string
```
void insert_string(String value)
            throws TypeMismatch,
                   InvalidValue
```
    Inserts a string value into the DynAny. Both bounded and unbounded strings are inserted using this method.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    InvalidValue - if the string inserted is longer than the bound of a bounded string
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_reference
```
void insert_reference(Object value)
               throws TypeMismatch,
                      InvalidValue
```
    Inserts a reference to a CORBA object into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_typecode
```
void insert_typecode(TypeCode value)
              throws TypeMismatch,
                     InvalidValue
```
    Inserts a TypeCode object into the DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_longlong
```
void insert_longlong(long value)
              throws TypeMismatch,
                     InvalidValue
```
    Inserts a long value into the DynAny. The IDL long long data type is mapped to the Java long data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_ulonglong
```
void insert_ulonglong(long value)
               throws TypeMismatch,
                      InvalidValue
```
    Inserts a long value into the DynAny. The IDL unsigned long long data type is mapped to the Java long data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_wchar
```
void insert_wchar(char value)
           throws TypeMismatch,
                  InvalidValue
```
    Inserts a char value into the DynAny. The IDL wchar data type is mapped to the Java char data type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_wstring
```
void insert_wstring(String value)
             throws TypeMismatch,
                    InvalidValue
```
    Inserts a string value into the DynAny. Both bounded and unbounded strings are inserted using this method.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    InvalidValue - if the string inserted is longer than the bound of a bounded string
    
    TypeMismatch
  - insert_any
```
void insert_any(Any value)
         throws TypeMismatch,
                InvalidValue
```
    Inserts an Any value into the Any represented by this DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_dyn_any
```
void insert_dyn_any(DynAny value)
             throws TypeMismatch,
                    InvalidValue
```
    Inserts the Any value contained in the parameter DynAny into the Any represented by this DynAny.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - insert_val
```
void insert_val(Serializable value)
         throws TypeMismatch,
                InvalidValue
```
    Inserts a reference to a Serializable object into this DynAny. The IDL ValueBase type is mapped to the Java Serializable type.
    
    Throws:
    
    InvalidValue - if this DynAny has components but has a current position of -1
    
    TypeMismatch - if called on a DynAny whose current component itself has components
  - get_boolean
```
boolean get_boolean()
             throws TypeMismatch,
                    InvalidValue
```
    Extracts the boolean value from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_octet
```
byte get_octet()
        throws TypeMismatch,
               InvalidValue
```
    Extracts the byte value from this DynAny. The IDL octet data type is mapped to the Java byte data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_char
```
char get_char()
       throws TypeMismatch,
              InvalidValue
```
    Extracts the char value from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_short
```
short get_short()
         throws TypeMismatch,
                InvalidValue
```
    Extracts the short value from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_ushort
```
short get_ushort()
          throws TypeMismatch,
                 InvalidValue
```
    Extracts the short value from this DynAny. The IDL ushort data type is mapped to the Java short data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_long
```
int get_long()
      throws TypeMismatch,
             InvalidValue
```
    Extracts the integer value from this DynAny. The IDL long data type is mapped to the Java int data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_ulong
```
int get_ulong()
       throws TypeMismatch,
              InvalidValue
```
    Extracts the integer value from this DynAny. The IDL ulong data type is mapped to the Java int data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_float
```
float get_float()
         throws TypeMismatch,
                InvalidValue
```
    Extracts the float value from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_double
```
double get_double()
           throws TypeMismatch,
                  InvalidValue
```
    Extracts the double value from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_string
```
String get_string()
           throws TypeMismatch,
                  InvalidValue
```
    Extracts the string value from this DynAny. Both bounded and unbounded strings are extracted using this method.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_reference
```
Object get_reference()
              throws TypeMismatch,
                     InvalidValue
```
    Extracts the reference to a CORBA Object from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_typecode
```
TypeCode get_typecode()
               throws TypeMismatch,
                      InvalidValue
```
    Extracts the TypeCode object from this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_longlong
```
long get_longlong()
           throws TypeMismatch,
                  InvalidValue
```
    Extracts the long value from this DynAny. The IDL long long data type is mapped to the Java long data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_ulonglong
```
long get_ulonglong()
            throws TypeMismatch,
                   InvalidValue
```
    Extracts the long value from this DynAny. The IDL unsigned long long data type is mapped to the Java long data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_wchar
```
char get_wchar()
        throws TypeMismatch,
               InvalidValue
```
    Extracts the long value from this DynAny. The IDL wchar data type is mapped to the Java char data type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_wstring
```
String get_wstring()
            throws TypeMismatch,
                   InvalidValue
```
    Extracts the string value from this DynAny. Both bounded and unbounded strings are extracted using this method.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue
  - get_any
```
Any get_any()
     throws TypeMismatch,
            InvalidValue
```
    Extracts an Any value contained in the Any represented by this DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_dyn_any
```
DynAny get_dyn_any()
            throws TypeMismatch,
                   InvalidValue
```
    Extracts the Any value contained in the Any represented by this DynAny and returns it wrapped into a new DynAny.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - get_val
```
Serializable get_val()
              throws TypeMismatch,
                     InvalidValue
```
    Extracts a Serializable object from this DynAny. The IDL ValueBase type is mapped to the Java Serializable type.
    
    Throws:
    
    TypeMismatch - if the accessed component in the DynAny is of a type that is not equivalent to the requested type.
    
    TypeMismatch - if called on a DynAny whose current component itself has components
    
    InvalidValue - if this DynAny has components but has a current position of -1
  - seek
```
boolean seek(int index)
```
    Sets the current position to index. The current position is indexed 0 to n-1, that is, index zero corresponds to the first component. The operation returns true if the resulting current position indicates a component of the DynAny and false if index indicates a position that does not correspond to a component. Calling seek with a negative index is legal. It sets the current position to -1 to indicate no component and returns false. Passing a non-negative index value for a DynAny that does not have a component at the corresponding position sets the current position to -1 and returns false.
  - rewind
```
void rewind()
```
    Is equivalent to seek(0).
  - next
```
boolean next()
```
    Advances the current position to the next component. The operation returns true while the resulting current position indicates a component, false otherwise. A false return value leaves the current position at -1. Invoking next on a DynAny without components leaves the current position at -1 and returns false.
  - component_count
```
int component_count()
```
    Returns the number of components of a DynAny. For a DynAny without components, it returns zero. The operation only counts the components at the top level. For example, if component_count is invoked on a DynStruct with a single member, the return value is 1, irrespective of the type of the member.
    - For sequences, the operation returns the current number of elements.
    - For structures, exceptions, and value types, the operation returns the number of members.
    - For arrays, the operation returns the number of elements.
    - For unions, the operation returns 2 if the discriminator indicates that a named member is active, otherwise, it returns 1.
    - For DynFixed and DynEnum, the operation returns zero.
  - current_component
```
DynAny current_component()
                  throws TypeMismatch
```
    Returns the DynAny for the component at the current position. It does not advance the current position, so repeated calls to current_component without an intervening call to rewind, next, or seek return the same component. The returned DynAny object reference can be used to get/set the value of the current component. If the current component represents a complex type, the returned reference can be narrowed based on the TypeCode to get the interface corresponding to the to the complex type. Calling current_component on a DynAny that cannot have components, such as a DynEnum or an empty exception, raises TypeMismatch. Calling current_component on a DynAny whose current position is -1 returns a nil reference. The iteration operations, together with current_component, can be used to dynamically compose an any value. After creating a dynamic any, such as a DynStruct, current_component and next can be used to initialize all the components of the value. Once the dynamic value is completely initialized, to_any creates the corresponding any value.
    
    Throws:
    
    TypeMismatch - If called on a DynAny that cannot have components, such as a DynEnum or an empty exception

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2016, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.

Interface DynAnyOperations

Method Summary

Method Detail

type

assign

from_any

to_any

equal

destroy

copy

insert_boolean

insert_octet

insert_char

insert_short

insert_ushort

insert_long

insert_ulong

insert_float

insert_double

insert_string

insert_reference

insert_typecode

insert_longlong

insert_ulonglong

insert_wchar

insert_wstring

insert_any

insert_dyn_any

insert_val

get_boolean

get_octet

get_char

get_short

get_ushort

get_long

get_ulong

get_float

get_double

get_string

get_reference

get_typecode

get_longlong

get_ulonglong

get_wchar

get_wstring

get_any

get_dyn_any

get_val

seek

rewind

next

component_count

current_component