public final class Inet6Address extends InetAddress
The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the hexadecimal values of the eight 16-bit pieces of the address. This is the full form. For example,
1080:0:0:0:8:800:200C:417A
Note that it is not necessary to write the leading zeros in an individual field. However, there must be at least one numeral in every field, except as described below.
Due to some methods of allocating certain styles of IPv6 addresses, it will be common for addresses to contain long strings of zero bits. In order to make writing addresses containing zero bits easier, a special syntax is available to compress the zeros. The use of "::" indicates multiple groups of 16-bits of zeros. The "::" can only appear once in an address. The "::" can also be used to compress the leading and/or trailing zeros in an address. For example,
1080::8:800:200C:417A
An alternative form that is sometimes more convenient when dealing with a mixed environment of IPv4 and IPv6 nodes is x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of the six high-order 16-bit pieces of the address, and the 'd's are the decimal values of the four low-order 8-bit pieces of the standard IPv4 representation address, for example,
::FFFF:129.144.52.38
::129.144.52.38
where "::FFFF:d.d.d.d" and "::d.d.d.d" are, respectively, the general forms of an IPv4-mapped IPv6 address and an IPv4-compatible IPv6 address. Note that the IPv4 portion must be in the "d.d.d.d" form. The following forms are invalid:
::FFFF:d.d.d
::FFFF:d.d
::d.d.d
::d.d
The following form:
::FFFF:d
is valid, however it is an unconventional representation of the IPv4-compatible IPv6 address,
::255.255.0.d
while "::d" corresponds to the general IPv6 address "0:0:0:0:0:0:0:d".
For methods that return a textual representation as output value, the full form is used. Inet6Address will return the full form because it is unambiguous when used in combination with other textual data.
IPv4-mapped address Of the form::ffff:w.x.y.z, this IPv6 address is used to represent an IPv4 address. It allows the native program to use the same address data structure and also the same socket when communicating with both IPv4 and IPv6 nodes. In InetAddress and Inet6Address, it is used for internal representation; it has no functional role. Java will never return an IPv4-mapped address. These classes can take an IPv4-mapped address as input, both in byte array and text representation. However, it will be converted into an IPv4 address.
The textual representation of IPv6 addresses as described above can be extended to specify IPv6 scoped addresses. This extension to the basic addressing architecture is described in [draft-ietf-ipngwg-scoping-arch-04.txt].
Because link-local and site-local addresses are non-global, it is possible that different hosts may have the same destination address and may be reachable through different interfaces on the same originating system. In this case, the originating system is said to be connected to multiple zones of the same scope. In order to disambiguate which is the intended destination zone, it is possible to append a zone identifier (or scope_id) to an IPv6 address.
The general format for specifying the scope_id is the following:
IPv6-address%scope_id
The IPv6-address is a literal IPv6 address as described above. The scope_id refers to an interface on the local system, and it can be specified in two ways.
NetworkInterface.getName()
for the particular interface in
question. When an Inet6Address is created in this way, the numeric scope-id
is determined at the time the object is created by querying the relevant
NetworkInterface.Note also, that the numeric scope_id can be retrieved from Inet6Address instances returned from the NetworkInterface class. This can be used to find out the current scope ids configured on the system.
Modifier and Type | Method and Description |
---|---|
boolean |
equals(Object obj)
Compares this object against the specified object.
|
byte[] |
getAddress()
Returns the raw IP address of this
InetAddress object. |
static Inet6Address |
getByAddress(String host,
byte[] addr,
int scope_id)
Create an Inet6Address in the exact manner of
InetAddress.getByAddress(String,byte[]) except that the IPv6 scope_id is
set to the given numeric value. |
static Inet6Address |
getByAddress(String host,
byte[] addr,
NetworkInterface nif)
Create an Inet6Address in the exact manner of
InetAddress.getByAddress(String,byte[]) except that the IPv6 scope_id is
set to the value corresponding to the given interface for the address
type specified in addr . |
String |
getHostAddress()
Returns the IP address string in textual presentation.
|
NetworkInterface |
getScopedInterface()
Returns the scoped interface, if this instance was created with
with a scoped interface.
|
int |
getScopeId()
Returns the numeric scopeId, if this instance is associated with
an interface.
|
int |
hashCode()
Returns a hashcode for this IP address.
|
boolean |
isAnyLocalAddress()
Utility routine to check if the InetAddress in a wildcard address.
|
boolean |
isIPv4CompatibleAddress()
Utility routine to check if the InetAddress is an
IPv4 compatible IPv6 address.
|
boolean |
isLinkLocalAddress()
Utility routine to check if the InetAddress is an link local address.
|
boolean |
isLoopbackAddress()
Utility routine to check if the InetAddress is a loopback address.
|
boolean |
isMCGlobal()
Utility routine to check if the multicast address has global scope.
|
boolean |
isMCLinkLocal()
Utility routine to check if the multicast address has link scope.
|
boolean |
isMCNodeLocal()
Utility routine to check if the multicast address has node scope.
|
boolean |
isMCOrgLocal()
Utility routine to check if the multicast address has organization scope.
|
boolean |
isMCSiteLocal()
Utility routine to check if the multicast address has site scope.
|
boolean |
isMulticastAddress()
Utility routine to check if the InetAddress is an IP multicast
address.
|
boolean |
isSiteLocalAddress()
Utility routine to check if the InetAddress is a site local address.
|
getAllByName, getByAddress, getByAddress, getByName, getCanonicalHostName, getHostName, getLocalHost, getLoopbackAddress, isReachable, isReachable, toString
public static Inet6Address getByAddress(String host, byte[] addr, NetworkInterface nif) throws UnknownHostException
InetAddress.getByAddress(String,byte[])
except that the IPv6 scope_id is
set to the value corresponding to the given interface for the address
type specified in addr
. The call will fail with an
UnknownHostException if the given interface does not have a numeric
scope_id assigned for the given address type (eg. link-local or site-local).
See here for a description of IPv6
scoped addresses.host
- the specified hostaddr
- the raw IP address in network byte ordernif
- an interface this address must be associated with.UnknownHostException
- if IP address is of illegal length, or if the interface does not
have a numeric scope_id assigned for the given address type.public static Inet6Address getByAddress(String host, byte[] addr, int scope_id) throws UnknownHostException
InetAddress.getByAddress(String,byte[])
except that the IPv6 scope_id is
set to the given numeric value. The scope_id is not checked to determine
if it corresponds to any interface on the system.
See here for a description of IPv6
scoped addresses.host
- the specified hostaddr
- the raw IP address in network byte orderscope_id
- the numeric scope_id for the address.UnknownHostException
- if IP address is of illegal length.public boolean isMulticastAddress()
isMulticastAddress
in class InetAddress
boolean
indicating if the InetAddress is an IP
multicast addresspublic boolean isAnyLocalAddress()
isAnyLocalAddress
in class InetAddress
boolean
indicating if the Inetaddress is
a wildcard address.public boolean isLoopbackAddress()
isLoopbackAddress
in class InetAddress
boolean
indicating if the InetAddress is a loopback
address; or false otherwise.public boolean isLinkLocalAddress()
isLinkLocalAddress
in class InetAddress
boolean
indicating if the InetAddress is a link local
address; or false if address is not a link local unicast address.public boolean isSiteLocalAddress()
isSiteLocalAddress
in class InetAddress
boolean
indicating if the InetAddress is a site local
address; or false if address is not a site local unicast address.public boolean isMCGlobal()
isMCGlobal
in class InetAddress
boolean
indicating if the address has is a multicast
address of global scope, false if it is not of global scope or
it is not a multicast addresspublic boolean isMCNodeLocal()
isMCNodeLocal
in class InetAddress
boolean
indicating if the address has is a multicast
address of node-local scope, false if it is not of node-local
scope or it is not a multicast addresspublic boolean isMCLinkLocal()
isMCLinkLocal
in class InetAddress
boolean
indicating if the address has is a multicast
address of link-local scope, false if it is not of link-local
scope or it is not a multicast addresspublic boolean isMCSiteLocal()
isMCSiteLocal
in class InetAddress
boolean
indicating if the address has is a multicast
address of site-local scope, false if it is not of site-local
scope or it is not a multicast addresspublic boolean isMCOrgLocal()
isMCOrgLocal
in class InetAddress
boolean
indicating if the address has is a multicast
address of organization-local scope, false if it is not of
organization-local scope or it is not a multicast addresspublic byte[] getAddress()
InetAddress
object. The result
is in network byte order: the highest order byte of the address is in
getAddress()[0]
.getAddress
in class InetAddress
public int getScopeId()
public NetworkInterface getScopedInterface()
public String getHostAddress()
getHostAddress
in class InetAddress
public int hashCode()
hashCode
in class InetAddress
Object.equals(java.lang.Object)
,
System.identityHashCode(java.lang.Object)
public boolean equals(Object obj)
true
if and only if the argument is not null
and it represents
the same IP address as this object.
Two instances of InetAddress
represent the same IP address
if the length of the byte arrays returned by getAddress
is the
same for both, and each of the array components is the same for the byte
arrays.
equals
in class InetAddress
obj
- the object to compare against.true
if the objects are the same; false
otherwise.InetAddress.getAddress()
public boolean isIPv4CompatibleAddress()
boolean
indicating if the InetAddress is an IPv4
compatible IPv6 address; or false if address is IPv4 address. Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2016, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.