public interface DataOutput
DataOutput interface provides
for converting data from any of the Java
primitive types to a series of bytes and
writing these bytes to a binary stream.
There is also a facility for converting
a String into
modified UTF-8
format and writing the resulting series
of bytes.
For all the methods in this interface that
write bytes, it is generally true that if
a byte cannot be written for any reason,
an IOException is thrown.
DataInput,
DataOutputStream| Modifier and Type | Method and Description |
|---|---|
void |
write(byte[] b)
Writes to the output stream all the bytes in array
b. |
void |
write(byte[] b,
int off,
int len)
Writes
len bytes from array
b, in order, to
the output stream. |
void |
write(int b)
Writes to the output stream the eight
low-order bits of the argument
b. |
void |
writeBoolean(boolean v)
Writes a
boolean value to this output stream. |
void |
writeByte(int v)
Writes to the output stream the eight low-
order bits of the argument
v. |
void |
writeBytes(String s)
Writes a string to the output stream.
|
void |
writeChar(int v)
Writes a
char value, which
is comprised of two bytes, to the
output stream. |
void |
writeChars(String s)
Writes every character in the string
s,
to the output stream, in order,
two bytes per character. |
void |
writeDouble(double v)
Writes a
double value,
which is comprised of eight bytes, to the output stream. |
void |
writeFloat(float v)
Writes a
float value,
which is comprised of four bytes, to the output stream. |
void |
writeInt(int v)
Writes an
int value, which is
comprised of four bytes, to the output stream. |
void |
writeLong(long v)
Writes a
long value, which is
comprised of eight bytes, to the output stream. |
void |
writeShort(int v)
Writes two bytes to the output
stream to represent the value of the argument.
|
void |
writeUTF(String s)
Writes two bytes of length information
to the output stream, followed
by the
modified UTF-8
representation
of every character in the string
s. |
void write(int b)
throws IOException
b.
The 24 high-order bits of b
are ignored.b - the byte to be written.IOException - if an I/O error occurs.void write(byte[] b)
throws IOException
b.
If b is null,
a NullPointerException is thrown.
If b.length is zero, then
no bytes are written. Otherwise, the byte
b[0] is written first, then
b[1], and so on; the last byte
written is b[b.length-1].b - the data.IOException - if an I/O error occurs.void write(byte[] b,
int off,
int len)
throws IOException
len bytes from array
b, in order, to
the output stream. If b
is null, a NullPointerException
is thrown. If off is negative,
or len is negative, or off+len
is greater than the length of the array
b, then an IndexOutOfBoundsException
is thrown. If len is zero,
then no bytes are written. Otherwise, the
byte b[off] is written first,
then b[off+1], and so on; the
last byte written is b[off+len-1].b - the data.off - the start offset in the data.len - the number of bytes to write.IOException - if an I/O error occurs.void writeBoolean(boolean v)
throws IOException
boolean value to this output stream.
If the argument v
is true, the value (byte)1
is written; if v is false,
the value (byte)0 is written.
The byte written by this method may
be read by the readBoolean
method of interface DataInput,
which will then return a boolean
equal to v.v - the boolean to be written.IOException - if an I/O error occurs.void writeByte(int v)
throws IOException
v.
The 24 high-order bits of v
are ignored. (This means that writeByte
does exactly the same thing as write
for an integer argument.) The byte written
by this method may be read by the readByte
method of interface DataInput,
which will then return a byte
equal to (byte)v.v - the byte value to be written.IOException - if an I/O error occurs.void writeShort(int v)
throws IOException
(byte)(0xff & (v >> 8))
(byte)(0xff & v)
The bytes written by this method may be
read by the readShort method
of interface DataInput , which
will then return a short equal
to (short)v.
v - the short value to be written.IOException - if an I/O error occurs.void writeChar(int v)
throws IOException
char value, which
is comprised of two bytes, to the
output stream.
The byte values to be written, in the order
shown, are:
(byte)(0xff & (v >> 8))
(byte)(0xff & v)
The bytes written by this method may be
read by the readChar method
of interface DataInput , which
will then return a char equal
to (char)v.
v - the char value to be written.IOException - if an I/O error occurs.void writeInt(int v)
throws IOException
int value, which is
comprised of four bytes, to the output stream.
The byte values to be written, in the order
shown, are:
(byte)(0xff & (v >> 24))
(byte)(0xff & (v >> 16))
(byte)(0xff & (v >> 8))
(byte)(0xff & v)
The bytes written by this method may be read
by the readInt method of interface
DataInput , which will then
return an int equal to v.
v - the int value to be written.IOException - if an I/O error occurs.void writeLong(long v)
throws IOException
long value, which is
comprised of eight bytes, to the output stream.
The byte values to be written, in the order
shown, are:
(byte)(0xff & (v >> 56))
(byte)(0xff & (v >> 48))
(byte)(0xff & (v >> 40))
(byte)(0xff & (v >> 32))
(byte)(0xff & (v >> 24))
(byte)(0xff & (v >> 16))
(byte)(0xff & (v >> 8))
(byte)(0xff & v)
The bytes written by this method may be
read by the readLong method
of interface DataInput , which
will then return a long equal
to v.
v - the long value to be written.IOException - if an I/O error occurs.void writeFloat(float v)
throws IOException
float value,
which is comprised of four bytes, to the output stream.
It does this as if it first converts this
float value to an int
in exactly the manner of the Float.floatToIntBits
method and then writes the int
value in exactly the manner of the writeInt
method. The bytes written by this method
may be read by the readFloat
method of interface DataInput,
which will then return a float
equal to v.v - the float value to be written.IOException - if an I/O error occurs.void writeDouble(double v)
throws IOException
double value,
which is comprised of eight bytes, to the output stream.
It does this as if it first converts this
double value to a long
in exactly the manner of the Double.doubleToLongBits
method and then writes the long
value in exactly the manner of the writeLong
method. The bytes written by this method
may be read by the readDouble
method of interface DataInput,
which will then return a double
equal to v.v - the double value to be written.IOException - if an I/O error occurs.void writeBytes(String s) throws IOException
s, taken in order, one byte
is written to the output stream. If
s is null, a NullPointerException
is thrown. If s.length
is zero, then no bytes are written. Otherwise,
the character s[0] is written
first, then s[1], and so on;
the last character written is s[s.length-1].
For each character, one byte is written,
the low-order byte, in exactly the manner
of the writeByte method . The
high-order eight bits of each character
in the string are ignored.
s - the string of bytes to be written.IOException - if an I/O error occurs.void writeChars(String s) throws IOException
s,
to the output stream, in order,
two bytes per character. If s
is null, a NullPointerException
is thrown. If s.length
is zero, then no characters are written.
Otherwise, the character s[0]
is written first, then s[1],
and so on; the last character written is
s[s.length-1]. For each character,
two bytes are actually written, high-order
byte first, in exactly the manner of the
writeChar method.s - the string value to be written.IOException - if an I/O error occurs.void writeUTF(String s) throws IOException
s.
If s is null,
a NullPointerException is thrown.
Each character in the string s
is converted to a group of one, two, or
three bytes, depending on the value of the
character.
If a character c
is in the range \u0001 through
\u007f, it is represented
by one byte:
(byte)c
If a character c is \u0000
or is in the range \u0080
through \u07ff, then it is
represented by two bytes, to be written
in the order shown:
(byte)(0xc0 | (0x1f & (c >> 6)))
(byte)(0x80 | (0x3f & c))
If a character
c is in the range \u0800
through uffff, then it is
represented by three bytes, to be written
in the order shown:
(byte)(0xe0 | (0x0f & (c >> 12)))
(byte)(0x80 | (0x3f & (c >> 6)))
(byte)(0x80 | (0x3f & c))
First,
the total number of bytes needed to represent
all the characters of s is
calculated. If this number is larger than
65535, then a UTFDataFormatException
is thrown. Otherwise, this length is written
to the output stream in exactly the manner
of the writeShort method;
after this, the one-, two-, or three-byte
representation of each character in the
string s is written.
The
bytes written by this method may be read
by the readUTF method of interface
DataInput , which will then
return a String equal to s.
s - the string value to be written.IOException - if an I/O error occurs. Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2016, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.